Five Auxiliary Machines, One Mill Line
A modern rice mill does not stop at the whitener. It controls flow, recovers broken rice from bran, pulls metal out of the grain, lifts plump kernels from the husk, and grades the immature paddy out. The Goldilocks auxiliary line covers all five in one catalog: the ZM discharge gate, the MDT husk aspirator, the MKXF bran separator, the CLG magnetic separator and the HS thickness grader. Each carries published capacities and dimensions, and each is test-run before export packing. A mill buys the gate from one supplier, the separator from the same invoice, and the grader with the same support behind it. One factory in Hunan, one standard, one team behind the whole back end of the mill. A mill buys the gate from one supplier, the separator from the same invoice, and the grader with the same support behind it. One factory in Hunan, one standard, one team behind the whole back end.
Recover More from Every Ton of Bran
Rice bran carries broken rice and pollard that sell for more than the bran itself, and the Goldilocks MKXF separator takes them out. Efficiency stays above 96 percent on the published models, so the recovered grain goes straight back to the pack. The MDT aspirator then lifts plump kernels and broken husked rice from the husk stream, and the recovered substandard grain becomes feed or brewing material. Together the two machines turn a waste stream into a second income line. Every model carries published capacities, air volumes and dimensions, and the factory confirms the choice in writing. For a mill that measures every ton, the recovery on the bran side pays back fast. Every model carries published capacities, air volumes and dimensions, and the factory confirms the choice in writing. For a mill that measures every ton, the recovery on the bran side pays back fast. Good. The numbers prove it.
Protect the Mill and the Grain
Metal in the grain damages the equipment downstream, and immature paddy weakens the finished rice. The Goldilocks CLG magnetic separator uses a strong magnetic field to pull metal impurities out of the raw grain, while the HS thickness grader separates immature brown rice from the milled stream by thickness. Both sit between the cleaners and the packhouse, where they do their work quietly and without attention. The CLG comes in two magnetic plates, 10000 gauss, and the HS grader runs from 3 to 10 tonnes per hour on four models. The factory test-runs each machine before packing and ships it documented. Clean grain and safe machines are the quiet promise of the back end. The CLG comes in two magnetic plates, 10000 gauss, and the HS grader runs from 3 to 10 tonnes per hour on four models. The factory test-runs each machine before packing and ships it documented. Clean grain and safe machines.
Ler mais
Products Introduction
The Magnetic Separator uses an extremely strong magnetic field to pull magnetic metal impurities out of the raw grain, improving purity and protecting the finished grain and the mill equipment. The CLG 300 and CLG 400 use magnetic plates rated at 10000 gauss, in dimensions 300x300x30 and 400x400x30 millimeters respectively, sized to the pipe. It sits between cleaning and milling, and the crew simply wipes the plates between seasons. Test-run before shipping with the gauss rating documented and a matching manual. The magnetic plates are standard parts ordered by number.
The MDT Series Paddy Husk Aspirator extracts plump grains, broken husked rice, incomplete kernels and shriveled paddy from paddy husks, and the recovered substandard grain is used as feed and brewing material. The four models MDT45, MDT60, MDT80 and MDT100 cover capacities from 0.9 to 1.8 tonnes per hour, separation efficiency above 90 percent, and air volumes from 3600 to 10500 cubic meters per hour. Compact and stable in air separation, it turns the husk by-product into a second income. Test-run before shipping with a matching manual and dimensions.
The MKXF Series Bran and Pollard Separator extracts broken rice and pollard from rice bran, enhancing economic benefits. The four models MKXF45, MKXF60, MKXF80 and MKXF100 cover capacities from 0.45 to 1.0 tonnes per hour, with small-model efficiency above 99 percent and large-model efficiency above 96 percent, and air volumes from 1800 to 6300 cubic meters per hour. It recovers the valuable grain left in the bran back to the pack, and the pollard sells as a by-product. Test-run before shipping with documentation matching the model.
The ZM Series Discharge Gate controls the flow of granular and powdered materials in grain, food and feed plants, and is the ideal equipment for material flow control. It comes in manual, electric, combined and pneumatic forms, with flexible operation, easy assembly and disassembly, high strength, good performance and a long life. The four models ZM25, ZM32, ZM40 and ZM50 cover openings from 250 to 500 millimeters, the electric model runs on 0.55 kW, and the pneumatic model pairs cylinders from SC40x250 to SC50x500. Test-run before shipping with documentation matching the model. The factory confirms the model in writing.
The HS Series Rice Thickness Grader separates immature grains from brown rice by thickness, on a reliable chain drive with minimal transmission loss. The screens are punched from steel plate and are durable and effective. The four models HS400, HS600, HS800 and HS1000 cover capacities from 3 to 10 tonnes per hour, power from 1.1 to 3 kilowatts, and dimensions from 1900x1050x2155 to 1920x1100x3150 millimeters. It sits after the whitener to take out the weak grains and send the plump rice to the pack. Test-run before shipping with documentation matching the model.
The Goldilocks auxiliary range finishes the rice mill with five machines. The ZM discharge gate controls flow in the pipes, the MDT aspirator recovers substandard grain from the husk, the MKXF separator recovers broken rice and pollard from the bran, the CLG magnetic separator pulls metal out of the raw grain, and the HS grader separates immature rice by thickness. Every model carries published capacities, air volumes and dimensions from the same Hunan factory, and each is test-run before export packing with a matching manual and parts list. Specs are published, spares are standard, and supply is factory-direct, matching the mills, conveyors and blowers in the same catalog.
How to Choose the Right Discharge Gate
A discharge gate is chosen by the pipe size and the drive the plant can run. The Goldilocks ZM series covers four sizes, 250, 320, 400 and 500 millimeters, and offers manual, electric, combined and pneumatic structures. Start from the pipe, pick the opening that matches it, and then choose the drive by the automation level. The electric model runs on 0.55 kilowatts, and the pneumatic model lists the cylinder size, from SC40x250 to SC50x500. The gate is strong, easy to assemble and disassemble, and built for the dusty pipe between the bin and the machine. The factory confirms the model in writing and test-runs each gate before packing. The electric model runs on 0.55 kilowatts, and the pneumatic model lists the cylinder size, from SC40x250 to SC50x500. The gate is strong, easy to assemble and disassemble, and built for the dusty pipe between the bin and the machine. The factory confirms the model in writing and test-runs each gate before packing. The opening size, the drive and the cylinder are all on the table.


Lift Plump Kernels from the Husk Stream
The husk stream out of a rice mill carries more than husk. It carries plump grains, broken husked rice, incomplete kernels and shriveled paddy that sell as feed or brewing material. The Goldilocks MDT aspirator takes them out with an air separation that stays above 90 percent efficiency across four models. The smallest handles 0.9 tonnes per hour and the largest 1.8, with published air volumes from 3600 to 10500 cubic meters per hour. The recovered grain does not go to waste, it goes to a secondary income. The factory sizes the aspirator against the husk flow, test-runs it before packing, and ships it with a matching manual. For a mill that weighs every bag of husk, the recovery pays for the machine.
The smallest handles 0.9 tonnes per hour and the largest 1.8, with published air volumes from 3600 to 10500 cubic meters per hour. The recovered grain does not go to waste, it goes to a secondary income. The factory sizes the aspirator against the husk flow, test-runs it before packing, and ships it with a matching manual. For a mill that weighs every bag of husk, the recovery pays for the machine.
Extract Broken Rice from the Bran
Bran sells by the ton, but the broken rice and pollard inside it sell for more, and leaving them in the bran leaves money on the floor. The Goldilocks MKXF separator pulls them out. The smaller models hold above 99 percent separation efficiency, the larger ones stay above 96, across four sizes from 0.45 to 1.0 tonnes per hour. The recovered broken rice goes back to the pack, and the pollard becomes a by-product sale. The published air volumes and dimensions let the mill size the machine against its bran flow, and the factory confirms the choice in writing. Each separator is test-run before export packing, with a matching English manual. For a mill that measures its bran, the separation pays. The smaller models hold above 99 percent separation efficiency, the larger ones stay above 96, across four sizes from 0.45 to 1.0 tonnes per hour. The recovered broken rice goes back to the pack, and the pollard becomes a by-product sale. The published air volumes and dimensions let the mill size the machine against its bran flow, and the factory confirms the choice in writing. Each separator is test-run before export packing, with a matching English manual.


Pull Metal Out Before It Costs You
A single nail in the grain can wreck a roller, bend a screen and stop a shift. The Goldilocks CLG magnetic separator uses a strong magnetic field of 10000 gauss to pull magnetic metal impurities out of the raw grain before the grain reaches the mill. The plates come in two sizes, 300 by 300 and 400 by 400 millimeters, sized to the pipe the grain flows through. The separator sits in the line, does its work quietly, and the crew wipes the metal off the plates between seasons. The factory supplies the plates as standard parts and ships the separator with the gauss rating documented. For a plant that has paid the repair bill once, the magnetic separator is the cheap insurance. The plates come in two sizes, 300 by 300 and 400 by 400 millimeters, sized to the pipe the grain flows through. The separator sits in the line, does its work quietly, and the crew wipes the metal off the plates between seasons. The factory supplies the plates as standard parts and ships the separator with the gauss rating documented. For a plant that has paid the repair bill once, the magnetic separator is the cheap insurance. It sits before the mill, where one nail would cost a week.
Separate Immature Paddy by Thickness
Immature brown rice is thin, chalky and weak, and it drags the whole batch down when it stays in the finished rice. The Goldilocks HS thickness grader separates it from the milled stream by thickness, on a chain drive with minimal transmission loss. Four models run from 3 to 10 tonnes per hour, from the HS400 at 1.1 kilowatts to the HS1000 at 3. The punched steel screens are durable and easy to replace by number. The grader sits after the whitener, takes out the weak grains, and leaves the plump rice to the pack. The factory test-runs each grader before export packing, with the dimensions listed for the floor plan. For a mill that grades its rice by thickness, the machine earns its place.
Four models run from 3 to 10 tonnes per hour, from the HS400 at 1.1 kilowatts to the HS1000 at 3. The punched steel screens are durable and easy to replace by number. The grader sits after the whitener, takes out the weak grains, and leaves the plump rice to the pack. The factory test-runs each grader before export packing, with the dimensions listed for the floor plan. For a mill that grades its rice by thickness, the machine earns its place. The chain drive stays quiet and the screens wear normally. That is the grading story. Good. The buyers notice. Straight away.

Turn By-Products into a Second Income


A rice mill throws away money when it throws away the husk and the bran. The Goldilocks MDT aspirator lifts plump kernels and broken husked rice out of the husk, and the MKXF separator recovers broken rice and pollard from the bran. Both recovered streams sell as feed or brewing material, and the mill buys the two machines from one catalog, one invoice and one team.
The published efficiencies, air volumes and dimensions make the choice on paper, and the factory confirms the model in writing. Each machine is test-run before export packing and ships documented. Together the two turn a waste stream into a profit line. For a mill that weighs every bag, the recovery pays back within a season. Both recovered streams sell as feed or brewing material, and the mill buys the two machines from one catalog, one invoice and one team. The published efficiencies, air volumes and dimensions make the choice on paper, and the factory confirms the model in writing. Each machine is test-run before export packing and ships documented. Together the two turn a waste stream into a profit line. For a mill that weighs every bag, the recovery pays back within a season. The husk becomes feed material, the bran becomes recovered rice.
Nothing leaves the plant as waste. That is the by-product plan. Good. It pays back quietly. And steadily. Season after season. The numbers add up.
More Features for Product
A nail in the grain can wreck a roller and stop a shift, and the Goldilocks CLG magnetic separator stops that nail before it reaches the mill. The 10000 gauss plates pull magnetic impurities out of the raw grain, and the crew wipes the plates between seasons. The HS grader then separates the immature brown rice by thickness, so the weak grains do not wear the screens in the whitener. Both machines sit between the cleaners and the packhouse, doing their work quietly. The factory documents the gauss rating and test-runs each machine before packing. For a plant that has paid a repair bill, the two are cheap insurance. Both machines sit between the cleaners and the packhouse, doing their work quietly. The factory documents the gauss rating and test-runs each machine before packing. For a plant that has paid a repair bill, the two are cheap insurance. The plates are wiped clean in ten minutes between seasons. The immature rice leaves the batch before the pack.
A separator that promises high efficiency but does not show it is just a claim. The Goldilocks catalog prints the separation efficiency next to every model: the MDT aspirator above 90 percent across four sizes, the MKXF separator above 96 to 99 percent, and the HS grader sized from 3 to 10 tonnes per hour. The factory confirms the model against the actual flow in writing, and test-runs each machine before export packing. The plant checks the delivered performance against the printed number, and the match is the proof. Published capacities, air volumes and dimensions let two quotes be compared line by line. That is the transparent way to buy. The factory confirms the model against the actual flow in writing, and test-runs each machine before export packing. The plant checks the delivered performance against the printed number, and the match is the proof. Published capacities, air volumes and dimensions let two quotes be compared line by line. That is the transparent way to buy. The efficiency does not stay a claim. It becomes a number on the plate.
Technical Parameters
| Model | Capacity(t/h) | Weight(kg) | Dimension(mm) |
|---|---|---|---|
| TCXP30 | 5-8 | 15 | 700X350X225 |
| TCXP40 | 7-12 | 21 | 770X450X270 |
| TCXP50 | 10-15 | 36 | 960X580X310 |
| CLG 300/10000GS | / | / | 300X300X30 |
| CLG 400/10000GS | / | / | 400X400X30 |
| Model | Capacity(t/h) | Power(kW) | Dimension (LxWxH mm) |
|---|---|---|---|
| HS400 | 3-4 | 1.1 | 1900x1050x2155 |
| HS600 | 5-7 | 1.5 | 2000x1050x2350 |
| HS800 | 6-9 | 1.5 | 2000x1050x2600 |
| HS1000 | 9-10 | 3 | 1920x1100x3150 |
| Model | Dimension(mm) | Power(kW) | Cylinder specification |
|---|---|---|---|
| ZM25 | 250×250 | 0.55 | SC40x250 |
| ZM32 | 320×320 | 0.55 | SC40x300 |
| ZM40 | 400×400 | 0.55 | SC50x400 |
| ZM50 | 500×500 | 0.55 | SC50x500 |
| Model | Capacity(t/h) | Separation Efficiency(%) | Air volume(m³/h) | Dimension(mm) |
|---|---|---|---|---|
| MKXF45 | 0.45 | >99 | 1800-3000 | 1400x550x1685 |
| MKXF60 | 0.6 | >99 | 2400-4000 | 1400x570x1705 |
| MKXF80 | 0.8 | >97 | 3000-5200 | 1400x855x1940 |
| MKXF100 | 1.0 | >96 | 3600-6300 | 1400x950x2100 |
| Model | Capacity(t/h) | Separation Efficiency(%) | Air volume(m³/h) | Dimension(mm) |
|---|---|---|---|---|
| MDT45 | 0.9 | >90 | 3600-5000 | 1540x505x1820 |
| MDT60 | 1.2 | >90 | 5500-7000 | 1540x655x1925 |
| MDT80 | 1.4 | >90 | 7500-9000 | 1540x855x2130 |
| MDT100 | 1.8 | >90 | 9000-10500 | 1540x1200x2200 |
Produtos relacionados
Alternative Names
discharge gate / discharge gate valve / flow control gate / slide gate valve / pneumatic discharge gate / electric discharge gate / discharge gate for silo / grain discharge gate / dust tight gate valve / rotary discharge gate / paddy husk aspirator / husk aspirator / paddy separator / rice husk separator / aspirator separator for rice mill / broken rice recovery / paddy husk processing / grain aspirator / husk processing machine / by-product recovery / bran separator / pollard separator / rice bran separator / broken rice separator / bran and pollard separator / rice mill separator / broken rice recovery from bran / bran processing machine / separator for rice bran / grain separator efficiency / magnetic separator / magnetic separator for grain / 10000 gauss magnet / magnetic plate separator / iron remover / metal separator for grain / magnetic grid / grain magnetic separator / protect mill rollers / magnetic separator price / rice thickness grader / thickness grader / paddy grader / immature paddy separator / rice grading machine / rice grader / thickness sorting machine / brown rice grader / rice mill grader / grain grading equipment
Enviar o seu pedido de informação agora
















